| Design speed:120m/min | Economic speed :80-100m/min |
| No | Name | Qty | Remark |
| 1 | Hydraulic stand | 4 | RS-1500-1800 type, Base paper lifting, clamping loosening, left shift, right shift are hydraulic control, two brakes, serrated or expand chuck. The maximum paper width is 1850mm, the maximum paper diameter 1500mm |
| 2 | Railing and pulley | 8 | 8m railing with 8 sets pulley |
| 3 | Single facer | 2 | SF-280S-1800mm. Adsorption,￠280mm Corrugated Rolls is tungsten carbide,motor frequency conversion control. |
| 4 | Duplex Bridge | 1 | ST-1800 Duplex bridge.Two sets of paper pulling department, electric correction. Automatically adjust and maintain synchronous adsorption according to the speed of single facer. |
| 5 | Pre-heater | 2 | MH-600T-1800, diameter of preheating cylinder: ￠600mm, electric adjust preheating area, trap is Shanghai brand |
| 6 | Pre-conditioner | 2 | MH-600T-1800, diameter of preheating cylinder: ￠600mm, electric adjust preheating area, trap is Shanghai brand |
| 7 | Triplex pre-heater | 1 | MH-600T-1800, diameter of preheating cylinder: ￠600mm, electric adjust preheating area, trap is Shanghai brand |
| 8 | Duplex glue machine | 1 | GA-288D-1800, glue roller, ￠288mm, motor frequency control |
| 9 | Double facer | 1 | DF-636-1800, 520mm×16 heating plates, pneumatic tensioning, hydraulic lifting, speed regulating motor for drive. |
| 10 | Drive unit | 1 | DF-636-1800, drive roller ￠636mm |
| 11 | NC slitter | 1 | SS-150P-1800, five blades and eight lines, lateral movement |
| 12 | NC cutter | 1 | NC-150N-1800, paper cutter shaft, ￠188mm |
| 13 | Paper feeding machine | 1 | Cf-120-1800, four metres in length, with lateral output |
| 14 | Glue Making System | 1 | It contains 1 main tank, 1 carrier tank and 1 glue storage tank, 2 upper tank and 2 lower tank with one side circulation, and 7 pumps.Pipeline provided by customer |
| 15 | Electric System | 1 | Adopt domestic famous brand, including electric wire from control cabinet to main machine |
| 16 | Steam system | 1 | Float ball water conveyer, pipeline on equipment valve provided by customer |
